Ship-2-Shore
Shop By Brands
Showing 1–12 of 14 results
5-in-1 Anti-Corrosion Wipes combine cleaning, penetration, lubrication, rust inhibition, and dielectric protection in a single disposable wipe. Designed for defence and maritime maintenance environments, these wipes provide rapid corrosion control while leaving a dry protective micro-barrier suitable for sensitive shipboard equipment. With high dielectric strength and deep rust inhibitor penetration, the wipes support routine shipboard corrosion maintenance without the need for curing time, specialised tools, or additional coatings. Features:
- Integrated cleaner, penetrant, lubricant and corrosion inhibitor
- Rust prevention
- Rust remover
- Deep rust inhibitor penetration
- No curing time, No downtime
- Dielectric to 40kV
- Environmentally friendly
- Leaves a protective micro-barrier that is dry to the touch
- Machinery
- Manufacturing equipment
- Food processing equipment
- Tooling equipment
- Tools
- Marine vessels
- Electronics/control boxes
- Light fixtures
- Metal window frames
- Railings
- Outdoor furniture
- Bikes
Anchor Chain Corrosion Control works by polar bonding to metal surfaces, displacing water and oxygen. Powerful penetrant that enters hard to reach areas. This coating is an excellent anti-seize marine lubricant. Anchor Chain is proven to prevent rust caused by salt water, fog and extreme weather conditions. Features:
- Easy to apply
- No curing time, No downtime
- Excellent lubricant and prevents corrosion
- No sandblasting
- Can be applied to damp surfaces
- Stops rust on contact
- Dielectric properties
- Environmentally friendly
- Commercial vessels
- Offshore oil & gas platforms
- Navigational buoys
- Mooring buoys
- Cruise ships
- Landing craft ramps
Automotive Rust Proofing is a rust prevention coating formulated to protect vehicles' undercarriage and all metal surfaces of all types of rust and corrosion. Instantly bonds to metal like a magnet, displacing water and oxygen and removes rust cells. This flexible and crack-resistant coating holds up against harsh weather, road salt, sand and other rust-inducing conditions to protect your vehicle. Features
- Easy to apply
- Lubricant and penetrant
- Penetrates rust and descales
- Electrically non-conductive; stops electrolysis
- Non-tacky coating, does not attract dirt and debris
- No curing time, No downtime
- Self-healing
- Environmentally friendly
- Rubber compatible to ASTM D471 standards
- Fleet vehicles
- Trucks and trailers
- Heavy equipment
- Automobiles
- Rail cars
- Agricultural equipment
- Battery terminals
- Electrical connectors
- Engine bays
Bridge & Steel Corrosion Control is the ultimate rust inhibitor for bridges and steel structures. It polar bonds to all types of metal, like a magnet to steel, displacing water and oxygen. Features:
- No sandblasting required
- Can be applied to damp surfaces
- Stops rust on contact
- No curing time, No downtime
- Creeps into pitting corrosion, cracks and crevices
- Prevents corrosion on bolts
- Dielectric properties; stops electrolysis
- Excellent rust penetrant
- Penetrates under rust and acts as a descaler
- Long lasting
- Cable-Stayed and Suspension Bridges
- Truss Bridges
- Beam Bridges
- Arch Bridges (wrought iron)
- Cantilever Bridges
Corrosion Shield works by polar bonding to metal surfaces, displacing water and oxygen and preventing rust. It creates an even, lubricating thick film that penetrates hard-to-reach areas, providing long lasting anti-rust, corrosion and anti-seize capabilities. Features:
- 500+ hours without corrosion in ASTM B117-18 salt spray chamber test
- Ultra low VOCs & Zinc Free
- No surface preparation
- Long lasting
- No curing time, No downtime
- Dielectric strength 36,000 volts
- Works on a wide range of metals
- Safe on batteries, electrical and electronics
- Can be applied to damp surfaces
- Can be applied over existing rust and paint
- Removes easily with high PH detergent
- Environmentally friendly
- Protection for Epoxy coated surfaces and bare metal for long term storage
- Wellheads
- Pipelines & Piping
- Electrical & Electronics
- Fittings & Flanges
- Offshore rigs
- Machined surfaces
- Batteries
- Sculptures
- Cranes
- Motors
CPC 500 is a U.S. Navy MIL-PRF 16173E approved high-performance, long-lasting rust inhibitor used to treat and prevent corrosion. Features:
- Use on voids, tanks, rudders, retractable chocks, deck machinery, boat davits, watertight door assemblies, refuelling station receiver assemblies, fast track assemblies, anchor windlass controllers, and life raft assemblies
- 500+ hours without corrosion in a salt-spray chamber
- Rubber compatible with ASTM D471 standards
- Stops electrolysis caused by dissimilar metals
- Dielectric strength to 36,000 volts
- Self-healing
- No curing time, No downtime
- Easy to use
- No sandblasting required
Di-Electric Spray is an anti-rust spray that protects hard drive and electronic components from corrosion. It forms a dynamic, self-healing, non-hardening and dripless film and acts as a liquid descaler that's resistant to cracking and safe on high voltage equipment and electronics. Its polar bonding properties form a long lasting, protective barrier to rust. Features:
- Apply directly
- Displaces moisture
- Penetrates rust and corrosion
- No curing time, No downtime
- Resists splash, spray & submersion
- High pressure lubricant
- Dielectric strength >40kV
- Stop electrolysis and prevent corrosion
- Environmentally friendly
- Circuit boards
- Wires
- Battery terminals
- Electric motors
- Electronics
- Switches
- Connectors
Heavy Duty HD Corrosion Shield works by polar bonding to metal surfaces, displacing water and oxygen and preventing rust. It creates an even, lubricating thick film that penetrates hard-to-reach areas, providing long lasting anti-rust, corrosion prevention and anti-seize capabilities. Features:
- 1000+ hours without corrosion in ASTM B117-18 salt spray chamber test
- Ultra low VOCs & Zinc Free
- No surface preparation
- No curing time, No downtime
- Dielectric strength 3,200 volts
- Works on a wide range of metals
- Safe on batteries, electrical and electronics
- Can be applied to damp surfaces
- Can be applied over existing rust and paint
- Removes easily with high PH detergent
- Environmentally friendly
- Long term storage lay up and export
- Equipment
- Parts
- Wellheads
- Tank deck piping & valves
- Fitting & Flanges
- Offshore rigs
- Machined surfaces
- Sculptures
- Cranes
- Motors
- Bottom of ballast tank plating
PLID Wrap Anti-Rust Tape is an industrial tape infused with S2S high-performance, long-lasting rust inhibitor. This corrosion protection tape removes water and oxygen and leaves a long-lasting barrier to stop corrosion. PLID Wrap holds up against harsh conditions and can be applied to wet, painted, or troubled surfaces. Features:
- One-step application process
- Non-hazardous, non-toxic and eco-friendly
- No curing time, No downtime
- Can be applied on wet surfaces
- Polar bonds to dissimilar metals
- Dielectric strength
- Used on both above and below ground and under water
- Long lasting, protective barrier
- Penetrates rust and corrosion
- Piping and pipelines
- Fittings, flanges and valves
- Pilings and pier structures
- Splash zones
- Structural steel and support bases
- Repair patch wall corners and other
- problem areas
- Combat corrosion under insulation (CUI)
Sailor Paste is a CPC 500 infused corrosion paste engineered for heavy-duty naval and defense corrosion protection. Provides a thick, long-lasting protective barrier. Sailor Putty can be top coated with polysiloxane paint making it suitable for both permanent and temporary corrosion control during vessel maintenance. Apply by brushing, rolling, or spreading. CPC 500 is a U.S. Navy MIL-PRF 16173E MILSPEC approved high-performance, long-lasting rust inhibitor. Tough enough to withstand the Navy’s crushing deployment cycle. Features:
- MIL-PRF 16173E approved corrosion compound
- Thick, long lasting corrosion protection barrier
- Stops electrolysis caused by dissimilar metals
- Self-healing
- No curing time, No downtime
- Easy to use
- Apply by brushing, rolling, or spreading.
- Shipboard metal surfaces
- Structural components and fittings
- Fleet maintenance and preservation works
- Naval repair and maintenance operations
Sailor Putty is an industrial corrosion prevention tape infused with a MIL-PRF 16173E MILSPEC rust inhibitor, purpose-built for shipboard and defence corrosion repair. Unlike traditional petrolatum tapes that require surface preparation and primer paste, S2S Sailor Putty is a simple, one-step application process, reducing maintenance time and complexity during naval operations. Features:
- Use on piping and pipelines, fittings, flanges, valves, pilings and pier structures, splash zones, and structural steel and support bases
- Stops electrolysis caused by dissimilar metals
- One-step application process
- No curing time, No downtime
- Effective on damp, rusted, and painted surfaces
- Suitable for above and below waterline applications
- Shipboard piping and pipelines
- Pilings, pier structures and splash zones
- Structural steel and support bases
Sailor Wipes are durable, disposable wipes infused with CPC 500, a U.S. Navy MIL-PRF 16173E MILSPEC approved corrosion inhibitor developed for shipboard corrosion control and maintenance operations. Designed for demanding naval environments, the wipes clean and polish metal surfaces while leaving behind a dry, protective micro-barrier that resists corrosion and electrolysis caused by dissimilar metals. Engineered to withstand extended deployment cycles, Sailor Wipes provide a practical solution for shipboard corrosion maintenance, touch-up protection, and routine preservation of exposed metal components without curing time or operational downtime. Features:
- Suitable for shipboard and metal surfaces
- MIL-PRF 16173E approved corrosion inhibitor formulation
- Stops electrolysis caused by dissimilar metals
- Easy to use
- No curing time, No downtime
- Dry to the touch protective barrier
- Naval vessels
- Shipboard equipment and fittings
- Electrical housings
- Fleet maintenance and corrosion control
