S2S
Shop By Brands
Showing 1–12 of 14 results
5 in 1 Anti Corrosion Wipes combine a cleaner, penetrant, lubricant, rust inhibitor and dielectric in one to provide the most convenient way to care for your tools and metal surfaces. These disposable wipes are easy to use and is infused with corrosion preventive coatings. Features:
- Rust prevention
- Rust remover
- Deep rust inhibitor penetration
- No curing time, No downtime
- Dielectric to 40kV
- Environmentally friendly
- Leaves a protective micro-barrier that is dry to the touch
- Machinery
- Manufacturing equipment
- Food processing equipment
- Tooling equipment
- Tools
- Marine vessels
- Electronics/control boxes
- Light fixtures
- Metal window frames
- Railings
- Outdoor furniture
- Bikes
Anchor Chain Corrosion Control works by polar bonding to metal surfaces, displacing water and oxygen. Powerful penetrant that enters hard to reach areas. Features:
- Easy to apply
- No curing time, No downtime
- Excellent lubricant and prevents corrosion
- No sandblasting
- Can be applied to damp surfaces
- Stops rust on contact
- Dielectric properties
- Environmentally friendly
- Commercial vessels
- Offshore oil & gas platforms
- Navigational buoys
- Mooring buoys
- Cruise ships
- Landing craft ramps
Automotive Rust Proofing is formulated to protect vehicles of all types of rust and corrosion. Instantly bonds to metal like a magnet, displacing water and oxygen and removes rust cells. Features:
- Easy to apply
- Lubricant and penetrant
- Penetrates rust and de-scales
- Electrically non-conductive; stops electrolysis
- Non-tacky coating, does not attract dirt and debris
- No curing time, No downtime
- Self-healing
- Environmentally friendly
- Rubber compatible to ASTM D471 standards
- Fleet vehicles
- Trucks and trailers
- Heavy equipment
- Automobiles
- Rail cars
- Agricultural equipment
- Battery terminals
- Electrical connectors
- Engine bays
Bridge & Steel Corrosion Control is the ultimate rust inhibitor for bridges and steel structures. It polar bonds to all types of metal, like a magnet to steel, displacing water and oxygen. Features:
- No sandblasting required
- Can be applied to damp surfaces
- Stops rust on contact
- No curing time, No downtime
- Creeps into pitting corrosion, cracks and crevices
- Prevents corrosion on bolts
- Dielectric properties; stops electrolysis
- Excellent rust penetrant
- Penetrates under rust and acts as a descaler
- Long lasting
- Cable-Stayed and Suspension Bridges
- Truss Bridges
- Beam Bridges
- Arch Bridges (wrought iron)
- Cantilever Bridges
Corrosion Shield works by polar bonding to metal surfaces, displacing water and oxygen. It creates an even, lubricating thick film that penetrates hard-to-reach areas, providing long lasting anti-rust and corrosion capabilities. Features:
- 500+ hours without corrosion in ASTM B117-18 salt spray chamber test
- Ultra low VOCs & Zinc Free
- No surface preparation
- Long lasting
- No curing time, No downtime
- Dielectric strength 36,000 volts
- Works on a wide range of metals
- Safe on batteries, electrical and electronics
- Can be applied to damp surfaces
- Can be applied over existing rust and paint
- Removes easily with high PH detergent
- Environmentally friendly
- Protection for Epoxy coated surfaces and bare metal for long term storage
- Wellheads
- Pipelines & Piping
- Electrical & Electronics
- Fittings & Flanges
- Offshore rigs
- Machined surfaces
- Batteries
- Sculptures
- Cranes
- Motors
CPC 500 is a U.S. Navy MIL-PRF 16173E-approved high-performance, long-lasting rust inhibitor. Tough enough to withstand the Navy’s crushing deployment cycle. Features:
- Use on voids, tanks, rudders, retractable chocks, deck machinery, boat davits, watertight door assemblies, refuelling station receiver assemblies, fast track assemblies, anchor windlass controllers, and life raft assemblies
- 500+ hours without corrosion in a salt-spray chamber
- Rubber compatible with ASTM D471 standards
- Stops electrolysis caused by dissimilar metals
- Dielectric strength to 36,000 volts
- Self-healing
- No curing time, No downtime
- Easy to use
- No sandblasting required
Di-Electric Spray forms a dynamic, self-healing, non-hardening and dripless film. It acts as a liquid de-scaler and polar bonds to metal to form a long lasting, protective barrier to rust. Features:
- Apply directly
- Displaces moisture
- Penetrates rust and corrosion
- No curing time, No downtime
- Resists splash, spray & submersion
- High pressure lubricant
- Dielectric strength >40kV
- Stop electrolysis and prevent corrosion
- Environmentally friendly
- Circuit boards
- Wires
- Battery terminals
- Electric motors
- Electronics
- Switches
- Connectors
Heavy Duty HD Corrosion Shield works by polar bonding to metal surfaces, displacing water and oxygen. It creates an even, lubricating thick film that penetrates hard-to-reach areas, providing long lasting anti-rust and corrosion capabilities.
PLID Wrap Anti-Corrosion Tape is an industrial tape infused with S2S high-performance, long-lasting rust inhibitor. Unlike petrolatum tapes that require surface preparation and primer, S2S is a simple, one-step application process. Features:
- One-step application process
- Non-hazardous, non-toxic and eco-friendly
- No curing time, No downtime
- Can be applied on wet surfaces
- Polar bonds to dissimilar metals
- Dielectric strength
- Used on both above and below ground and under water
- Long lasting, protective barrier
- Penetrates rust and corrosion
- Piping and pipelines
- Fittings, flanges and valves
- Pilings and pier structures
- Splash zones
- Structural steel and support bases
- Repair patch wall corners and other
- problem areas
- Combat corrosion under insulation (CUI)
CPC 500 infused into a paste. Provides a thick, long-lasting protective barrier. Sailor Putty can be top coated with polysiloxane paint. Apply by brushing, rolling, or spreading. CPC 500 is a U.S. Navy MIL-PRF 16173E-approved high-performance, long-lasting rust inhibitor. Tough enough to withstand the Navy’s crushing deployment cycle. Features:
- Use on metal surfaces
- Stops electrolysis caused by dissimilar metals
- Self-healing
- No curing time, No downtime
- Easy to use
- Apply by brushing, rolling, or spreading.
Sailor Putty is an industrial tape infused with a rust inhibitor that meets MIL-PRF 16173E. Unlike petrolatum tapes that require surface preparation and primer paste, S2S Sailor Putty is a simple, one-step application process. Features:
- Use on piping and pipelines, fittings, flanges, valves, pilings and pier structures, splash zones, and structural steel and support bases
- Repair wall corners and other problem areas
- Stops electrolysis caused by dissimilar metals
- One-step application process
- No curing time, No downtime
- Apply to damp, rusted, and painted surfaces
CPC500-infused into a durable, disposable wipe. Cleans and polishes metal surfaces while providing a protective micro-barrier that is dry to the touch. CPC 500 is a U.S. Navy MIL-PRF 16173E-approved high-performance, long-lasting rust inhibitor. Tough enough to withstand the Navy’s crushing deployment cycle. Features:
- Use on any metal surface
- Stops electrolysis caused by dissimilar metals
- Easy to use
- No curing time, No downtime
- Dry to the touch
