CDS Armour

CDS Armour

CDS Armour is a cutting-edge marine grade rubber coating that was developed primarily for the commercial marine and cruise industry. CDS Armour was developed as a solution to protect and extend the life of substrates within the marine industry but has since been used in other industries that experience harsh conditions (e.g., waste management, oil and gas, etc.)

CDS Armour can be used to coat, insulate and protect:

  • Hot/cold piping and drains;
  • Flexible insulation (e.g., Armor Flex);
  • HVAC units, cooling towers, fan rooms, plenums and ducts;
  • Walls, floors and ceilings;
  • Expansion joints;
  • 99% of all substrates (rust/corrosion prevention, waterproofing, energy conservation).

Benefits

  • All green water based product
  • Hydrophobic surface (water repellent)
  • Ultra high reflectivity (97.3%)
  • Maximum sunlight surface temperature of 40 degrees celcius
  • UV stable
  • Flame resistant
  • Acid resistant
  • Rust preventative
  • Low VOC
  • Odourless application
  • Mold & mildew preventative
  • Gas barrier
  • 10 year warranty
  • 10,000 psi tensile strength
  • Full spectrum freeze & thaw cycle
  • Snow & ice phobic
  • Single component
  • 5 year shelf life

CLICK HERE FOR MORE INFO

CDS Bond

CDS Bond

CDS Bond is a specialty bonding agent and primer, used to coat porous substrates for priming of CDS Armour, CDS Shark, CDS Fibre, and CDS Grip.

  • Applies directly over porous substrates to enhance adhesion of CDS Armour
  • All green water based product
  • No need for surface prep
  • Flame resistant
  • Low VOC
  • Odourless application
  • Single component
  • 5 year shelf life

CLICK HERE FOR MORE INFO

CDS Defence

CDS Defence

CDS Defence is a specialty rust converter and primer. It is used to treat, coat and protect existing rust problems.

  • Applies directly over the rust area
  • Converts rust to non-corrosive substrate
  • All green water based product
  • No need for surface prep (lower labor cost)
  • Integrity of metal
  • Flame resistant
  • Rust preventative
  • Low VOC
  • Odorless application
  • Single component
  • 1 year shelf life

CLICK HERE FOR MORE INFO

CDS Shark

CDS Shark

CDS Shark is an advanced water-proof non-skid marine grade flooring. CDS Shark can also be used for any area that requires an abrasive coating.

CDS Shark can be used to coat, insulate and protect:

  • Floors (Service area, fan rooms, generator rooms, walkways, etc..
  • Extremely effective on any surface that requires an anti-slip/ non-skid coating on.

Benefits

  • All green water based product
  • Hydrophobic surface (water repellent)
  • Ultra high reflectivity (97.3%)
  • Maximum sunlight surface temperature of 40 degrees celcius
  • UV stable
  • Flame resistant
  • Acid resistant
  • Rust preventative
  • Low VOC
  • Odourless application
  • Mold & mildew preventative
  • Gas barrier
  • 10 year warranty
  • 10,000 psi tensile strength
  • Full spectrum freeze & thaw cycle
  • Snow & ice phobic
  • Single component
  • 5 year shelf life

CLICK HERE FOR MORE INFO

CDS Fibre

CDS Fibre

CDS Fibre has all the benefits of CDS Armour with the ability to be applied on severely damaged surfaces to fill in large gaps and cracks.

CDS Fibre can be used to coat, insulate and protect:

  • Hot/cold piping and drains;
  • Flexible insulation (e.g., Armor Flex);
  • HVAC units, cooling towers, fan rooms, plenums and ducts;
  • Walls, floors and ceilings;
  • Expansion joints;
  • 99% of all substrates (rust/corrosion prevention, waterproofing,energy conservation).
  • Areas with wet surfaces and pending water
  • Gaps and cracks

Benefits

  • All green water based product
  • Hydrophobic surface (water repellent)
  • Ultra high reflectivity (97.3%)
  • Maximum sunlight surface temperature of 40 degrees celcius
  • UV stable
  • Flame resistant
  • Acid resistant
  • Rust preventative
  • Low VOC
  • Odourless application
  • Mold & mildew preventative
  • Gas barrier
  • 10 year warranty
  • 10,000 psi tensile strength
  • Full spectrum freeze & thaw cycle
  • Snow & ice phobic
  • Single component
  • 5 year shelf life

CLICK HERE FOR MORE INFO

CDS Grip

CDS Grip

CDS Grip is an advanced all green, marine grade, non slip coating for rails and hand grip areas. CDS Grip can also be used for any area that requires a mildly abrasive coating.

CDS Grip can be used to coat, insulate and protect:

  • Railings, ladders, hand grip areas to prevent slippage
  • Extremely effective on any surface that requires a non-slip coating.

Benefits

  • All green water based product
  • Hydrophobic surface (water repellent)
  • Ultra high reflectivity (97.3%)
  • Maximum sunlight surface temperature of 40 degrees celcius
  • UV stable
  • Flame resistant
  • Acid resistant
  • Rust preventative
  • Low VOC
  • Odourless application
  • Mold & mildew preventative
  • Gas barrier
  • 10 year warranty
  • 10,000 psi tensile strength
  • Full spectrum freeze & thaw cycle
  • Snow & ice phobic
  • Single component
  • 5 year shelf life

CLICK HERE FOR MORE INFO